You are using an outdated browser. Please upgrade your browser to improve your experience and security.
Instrument specific notes
The multiplexer MUX8-R2 offers the possibility to record reliable Open Circuit Potential (OCP) measurements in the Alternating mode, which allows to monitor the OCP of multiple samples / working electrodes over time with a single potentiostat. This is a significant improvement compared to its predecessors MUX8 and MUX16. In this application note it is demonstrated how to setup and perform an OCP measurement with the MUX8-R2 in the Alternating mode.
This is an article published by Analog Devices on their website about the EmStat Pico its advantages and application examples.
PSAN0408 - How to use the hardware synchronization of the MultiPalmSens4 t use it as a polypotentiostat
Field-effect transistor-based biosensors have drawn attentions due to its potential for small-scale, low cost, high-throughput and sensitive devices. Applications based on Bio-FET include, but not limited to, ion sensing, detection of DNA hybridization and protein binding.
This application note describes various ways to connect the portable SensitBT to Bluetooth. To connect using Android you can use PSTouch, in Windows you can use PSTrace or MethodSCRIPT. In iOS you can use MethodSCRIPT.
This article shows the ease of integration of the device into a system and demonstrates the range of applications of the potentiostat module by detailing three different electrochemical measurements: OCP (pH), cyclic voltammetry, and EIS.
This tutorial describes how to change the settings of the LAIRD BT900 Bluetooth module on the EmStat Pico development board.
This document describes how to connect an Arduino MKR Zero to the EmStat Pico development board
Describes how to use the Bluetooth module for EmStat3 OEM
This document shows how to connect the PalmSens4 via Bluetooth to PSTrace (for Windows) or PStouch (for Android)
Explains how to connect cables to the Sensit Smart