EmStat4M Module
Articles
EmStat4 Firmware
Find out more about the latest firmware and new features. Use PSTrace to change and upload the firmware. PSTrace also contains the latest firmware.
EmStat4M Communication Protocol V1.6
Describes how to communicate with the EmStat4M directly and how to send MethodSCRIPTS.
Remote IoT Corrosion Monitoring using Python
The goal for this application note is to show how to set up a remote IoT system for corrosion sensing using a PalmSens potentiostat coupled to a low-power single-board computer for connectivity. The idea is to have multiple of these 'in the field' attached to wind turbines, bridges, or other corroding infrastructure and monitor them via a central dashboard. The dashboard can be used to monitor corrosion rate over time.
EmStat4M Communication Protocol V1.5
Describes how to communicate with the EmStat4M directly and how to send MethodSCRIPTS.
EmStat4M Communication Protocol V1.4
Describes how to communicate with the EmStat4M directly and how to send MethodSCRIPTS.
Full Patch Notes for EmStat4 Firmware Update 1.3
Version 1.3.07 Added support for EmStat4 MUX Version 1.3.06 Fixed MUX8-R2 now works with up to 16 multiplexers instead of 14. Increased maximum “pck_add” variabl...
EmStat4M Communication Protocol V1.3
Describes how to communicate with the EmStat4M directly and how to send MethodSCRIPTS.
Firmware recovery
This article guides you on how to recover your PalmSens3 firmware if it does not connect properly anymore using a USB cable or Bluetooth.
MethodSCRIPT in action: introduction, demonstration and Q&A session
As an OEM supplier, PalmSens is aware of how important your own software is. We support our customers with several Software Development Kits (SDK), which make writing your own sof...
MethodSCRIPT: Tips & Tricks
These Tips & Tricks will guide you to create your first MethodSCRIPT, debug the script, solve any errors and visualize the results. At the end, you will find example scripts. A...
Troubleshooting on potentiostat experiments
Here are some general comments on trouble shooting that are valid for any experiment. We made this list to enable even not very experienced users to find the sources of trouble as soon as possible to keep the frustration level for you and coworkers as low as possible.
Potentiostatic and Galvanostatic EIS
What is GEIS? When to use GEIS or PEIS?
