EmStat4M Development Board

application-note

Remote IoT Corrosion Monitoring using Python

The goal for this application note is to show how to set up a remote IoT system for corrosion sensing using a PalmSens potentiostat coupled to a low-power single-board computer for connectivity. The idea is to have multiple of these 'in the field' attached to wind turbines, bridges, or other corroding infrastructure and monitor them via a central dashboard. The dashboard can be used to monitor corrosion rate over time.

EmStat4M LR potentiostat module for OEM
software

EmStat4 Firmware v1.3.4

See app note "EmStat Pico firmware updating" for more information about updating built-in and bare EmStat4M modules.

software

PS Laird BT900 Upgrade Tool

Use this tool to update your OEM device for use with Dual Mode wireless communication settings (SPP and BLE). Works with EmStat Pico Dev Board, Sensit BT and EmStat Go.

Article

Firmware recovery

This article guides you on how to recover your PalmSens3 firmware if it does not connect properly anymore using a USB cable or Bluetooth.

Article

MethodSCRIPT: Tips & Tricks

These Tips & Tricks will guide you to create your first MethodSCRIPT, debug the script, solve any errors and visualize the results. At the end, you will find example scripts. A...

Article Potentiostat

Troubleshooting on potentiostat experiments

Here are some general comments on trouble shooting that are valid for any experiment. We made this list to enable even not very experienced users to find the sources of trouble as soon as possible to keep the frustration level for you and coworkers as low as possible.