Articles
PSTrace Tutorial #19 – How to operate a Multiplexer?
If you need to measure more then one channel sequentially, a multiplexer is what you need. In this tutorial you will learn what a multiplexer is, how to connect and operate the mu...
PSTrace Tutorial #18 – Connect a stirrer, multiplexer or a custom sensor to a potentiostat
PalmSens potentiostats like the PalmSens4 and the MultiPalmSens4 have an auxiliary port, to connect external devices like a stirrer. In this tutorial you will learn how to connect...
MultiTrace Tutorial #6: Six things you didn’t know where possible with MultiTrace
Would you like to know some hidden gems in MultiTrace? This tutorial video will show you 6 things you didn’t know in 6 minutes in MultiTrace. MultiTrace allows you to contro...
MultiTrace Tutorial #5: Multiple Working Electrodes in the Same Cell
Measuring multiple working electrodes in the same cell is possible. This tutorial video will show you how to connect the electrodes and how to use MultiTrace. MultiTrace allows yo...
MultiTrace Tutorial #4: combining multiple potentiostats
MultiTrace allows you to control multiple PalmSens potentiostats / galvanostats / impedance analyzers. This can be a multichannel device such as the MultiPalmSens4, or multiple si...
BASI MF-1054 Water Jacketed Electrochemical Cell (100 ml)
MF-1054 is a fully equipped plug-n-play electrochemical cell kit that is also jacketed to conduct 2 or 3 electrode measurements with any potentiostat / galvanostat in the market.
BASI MF-1051: Standard Electrochemical Cell (100 ml)
BASI IP-U-COR-WD: Corrosion Cell For In-Situ Studies On Welded Joints Or Non-Flat Surface
The IP-U-COR-WD is a fully equipped, vertically mounted corrosion cell set-up for direct in-situ measurements on corrosion samples such as polished welded joints, cylindrical pipes and other square, circular, or rectangular coupons.
BASI IP-U-CCG-FS250: 250 ml Corrosion Cell for Flat Samples
The IP-U-CCG-FS250 is a fully equipped, horizontally mounted corrosion cell set-up for use with any PalmSens potentiostat.
BASI IP-U-1L-CCWJ: Astm Grade Corrosion Cell 1L
The IP-U-1L-CCWJ is a fully equipped, vertically mounted, and ASTM G59-97 grade jacketed corrosion cell set-up that can be used with any PalmSens potentiostat.
BASI IP-PECHC50: Fully Equipped Photo-Electrochemical H-Cell
The IP-PECHC50 is a fully equipped, horizontally mounted and a dual compartment H-Cell set-up with an additional quartz window.
BASI IP-HC-50: Fully Equipped H-Cell Kit
The IP-HC-50 is a fully equipped, horizontally mounted and a dual compartment electrochemical
MultiTrace Tutorial #3: simultaneously control multiple potentiostats
Potentiostat channels can synchronously perform the same measurements. Learn how in this tutorial. MultiTrace allows you to control multiple PalmSens potentiostats / galvanostats ...
MultiTrace Tutorial #2: individually control multiple potentiostats
The individual mode in MultiTrace controls each potentiostat channel independent of all other channels. MultiTrace allows you to control multiple PalmSens potentiostats / galvanos...
MultiTrace Tutorial #1: Starting Window
The starting window in MultiTrace allows you to choose between individual mode, simultaneous and mode. See how in this tutorial video. MultiTrace allows you to control multiple Pa...
BVT Stopper for glass cell
Documentation for BVT Stoppers. Stoppers are used for covering the glass cells produced by BVT. The system with the stopper is closed and prevents evaporation of the solution inside the glass cell.
