Articles
OG Carbon 2.0 Brochure
OG Carbon screen-printed carbon electrodes (SPCEs) are low cost, disposable and of high quality. They are perfect for biosensor research, quality control systems and teaching of electrochemistry.
EmStat4M Development Kit Manual
This manual helps you to setup the EmStat4M Development board and explains what is in the Kit.
MUX8-R2 2xSPE breakout drawing
Use this drawing if you would like to make an 8-electrode sensor that fits directly into the MUX8-R2 slots of a MUX8-R2 SPE connector.
Full Patch Notes for EmStat4 Firmware Update 1.3
Version 1.3.07 Added support for EmStat4 MUX Version 1.3.06 Fixed MUX8-R2 now works with up to 16 multiplexers instead of 14. Increased maximum “pck_add” variabl...
MethodSCRIPT v1.5
The MethodSCRIPT scripting language is designed to improve the flexibility of the PalmSens potentiostat and galvanostat devices for OEM users. It allows users to start measurements with arguments that are similar to the arguments in PSTrace. PalmSens provides libraries and examples for handling low level communication and generating scripts for MethodSCRIPT devices such as the EmStat Pico and EmStat4.
EmStat4M Communication Protocol V1.3
Describes how to communicate with the EmStat4M directly and how to send MethodSCRIPTS.
Using the TMP36 with PSTrace
Follow the steps in this manual in order to use a TMP36 temperature sensor in PSTrace.
Phase Zero Sensor Performance
Performance characteristics including Cyclic Voltammetry measurements.
BST Thick film electrodes overview
Macias Sensor Brochure
Brochure of the reusable Macias sensors Gold electrodes with three different types of reference electrodes.
Sample from Teacher’s Guide to the PalmSens Educational Kit
A general introduction, information, and instructions for experiments.
EmStat Pico and EmStat4 bootloader commands
This document explains how to enter the bootloader of the EmStat Pico or the EmStat4M and update the firmware.
Brochure Mediated Thick-film Carbon Electrodes
IR-Compensation and Uncompensated Resistance
In this application note it is explained how to use the iR compensation module of the Nexus, PalmSens4 and EmStat4X. We start by explaining the terminology and what issue is resolved by the iR compensation module. Then we show possibilities to determine the uncompensated resistance.
Overcompensation for Ru Script
Script to perform multiple measurements with different compensated resistances to check, when overcompensation happens.
What are Screen-printed electrodes and which electrode should I choose?
Screen-printed electrodes make electrochemical detection very interesting for analysis in everyday life, especially point-of-care measurements. The measuring devices as well as el...
PSTrace & MultiTrace Tutorial #21 – How to never lose your data with Autosaving?
Electrochemical measurement can take hours or even days. If your PC restarts or crashses, you don’t want to lose any data. This tutorial will explain how to regulary save yo...
PSTrace Tutorial #20 – How to perform Stripping Techniques with a potentiostat?
If you need to measure more then one channel sequentially, a multiplexer is what you need. In this tutorial you will learn what stripping techniques are, and how to perform them w...